33273 Woodward Ave, Birmingham, MI 48009248-792-5158support@yourtechbench.com

Tips On Dealing With Computer Overheating

An increasing number of people push their computers to the limits of their performance. A good example of this is when you are a gamer or a graphics designer who uses the computer most of the time. In such cases, you usually need to be careful with how the computer is set up so that it will be more reliable.

One of the things you specifically need to watch out for is overheating. When a computer is used close to the limits of its performance for a long time, there is the risk of it producing too much heat. When this is not taken care of properly, it could lead to a number of problems including slowing the computer down, damaging critical components such as the memory and processor and even putting the computer out of commission. Fortunately, there are many things you can do to address this problem. The most basic of these include:

Keep an eye on the temperature

If you happen to use your computer heavily, it would be wise to invest in software tools that enable you to keep an eye on the temperature within the computer. These are usually simple applications that will give out readings on the desktop. Depending on the type of software you get, you may also have access to other kinds of information including the performance of the processor and memory.

If you know the temperature limits of the computer (which depends on the types of components within it), then it will be easy for you to know what it starts overheating. This way, you can intervene on time before the heat causes much damage. If you are not sure about this, you should use a limit of 60 degrees Celsius to be the maximum for long term use. If it goes above this for too long, you would need to intervene.

Get the components optimized for heat flow

If you are having a constant problem with overheating, you can also try to rearrange the components of the computer to reduce this. Of course, this only works if you have a desktop computer which allows you some space to work. The best way to do this would be to consult a Birmingham computer support center. They will then figure out how to rearrange the components in the computer in such a manner that heat will be conducted out of it in the most efficient way possible. In some cases, they can even reposition some of the critical components of the motherboard so that they are not affected as much by the heat.

Get component upgrades

You should also consider component upgrades as a way to reduce overheating in your computer. Most of the time, this is the most effective way to deal with the problem. For instance, you can get a new, faster fan if the one you have keeps failing resulting in overheating. You can also replace devices such as the processor with faster ones, so that the computer does not operate at its limit most of the time. You can also do the same for other components such as the graphics card. Once again, this is usually possible if you own a desktop computer.

One of the most effective component upgrades you can get to reduce heat is getting a water cooling system. This has been found to be more effective at keeping the computer very cool, meaning that you can push it past its limits. This is why it is the preferred cooling method for most overclockers. The only downside to getting a water cooled system is the fact that it is delicate, and needs regular maintenance. If you work with a high quality computer support service, however, this should not be much of a problem.

Comments are closed.